You are here
Home > Product > 3.PS Interface > RcJoyCon PSCex2 – DualShock2 USB interface

RcJoyCon PSCex2 – DualShock2 USB interface

PSCex2 converts PlayStation2 controller(DualShock2) into PC joystick, keyboard, mouse.

Supports Pressure Sensitive Button of DualShock2.
PS Interface is unique adaptor that supports Pressure Sensitive Button.
You can see at Interface Manager(Configuration Program).

Transfers data above 100 times per sec with USB full speed(12mbps)

Supports AutoFire
Each button can be configured independantly(from 50 times per sec to 1time per 5 sec)
It is good to use in emulator games(MAME ect.).

Supports DirectX Force FeedBack
You can feel vibration of DualShock2 in Games(that supports Force FeedBack).
Vibration can be configured for each game.
Small motor of DualShock2 is usually works on off but PS Interface supports proportional vibration of small motor too.
(You can test vibration at Interface Manager)

Button-Vibration can be matched.
You can feed vibration at games that does not supports Force FeedBack.
Pressure of button increases vibration.

Joystick 5 axis 7axis convertible
Some game do not support more than 5 axis(for example Need for Speed).
Because 5 axis 7 axis is convertable, all game is possible.

Recognized as 5(7) axis 16button POV Joystick

Supports Analog POV
Analog lever of DualShock2 can work 360 degree POV.

Supports Keyboard, Mouse
PS Interface is recognized as hardware keyboard and mouse,
so you can use DualShock2 in the games that does not supports joystick.
Also it is good when watching movie as PC remote controller.

Supports DualShock1 and compatible controller.

No complicated device driver installation is needed.
PS Interface works immediately after plug in USB.
Every setting is saved in on-board memory,
so last setting is restored as they are when USB is plugged in or when PC is turned on.

Power for vibration can be selected between USB and external.
Vibration can work with USB power but if more strong vibration is needed,
you can select external power for vibration(6~12V DC is suitable).

Online firmware update

You can configure every function of PSCex2 precisely with Interface Manager.
https://www.exinterface.com/manager/
jex_100609_pscex2

pscex2_assem_pack

DualShock2 connector is not included.
You can make DualShock2 connector with PS2 controller extension cable and 8Pin connector(included).
How to make DualShock2 connector

Share with:


Similar Articles

3 thoughts on “RcJoyCon PSCex2 – DualShock2 USB interface

Leave a Reply

Top