You are here
Home > Discontinued > PsJoyCon USB EX – DualShock2 To PC converter

PsJoyCon USB EX – DualShock2 To PC converter

The next version of this product is PsJoyCon USB Ex2.

PsJoyCon USB EX converts PlayStation2 controller(DualShock2) into PC joystick, keyboard, mouse.

1233590393_69

1233590389_70

Supports Pressure Sensitive Button of DualShock2.
PsJoyCon is unique adaptor that supports Pressure Sensitive Button.
You can see at JoyCon Explorer(Configuration Program).

 

Transfers data above 100 times per sec.
USB controller works at 24mhz(works 48mhz with internal PLL)
USB full speed(12mbps)

Supports AutoFire
Each button can be configured independantly(from 50 times per sec to 1time per 5 sec)
It is good to use in Emulator games(MAME ect.).

Supports DirectX Force FeedBack
You can feel vibration of DualShock2 in Games(that supports Force FeedBack).
Vibration can be configured for each game.
Small motor of DualShock2 is usually works on off but PsJoyCon supports proportional vibration of small motor too.
(You can test vibration at JoyCon Explorer)

Button-Vibration can be matched.
You can feed vibration at games that does not supports Force FeedBack.
Pressure of button increases vibration.

Joystick 5 axis 7axis convertible
Some game do not support more than 5 axis(for example Need for Speed).
Because 5 axis 7 axis is convertable, all game is possible.

Recognized as 5(7) axis 16button POV Joystick

Supports Analog POV
Analog lever of DualShock2 can work 360 degree POV.

Supports Keyboard, Mouse
PsJoyCon is recognized as hardware keyboard and mouse,
so you can use DualShock2 in the games that does not supports joystick.
Also it is good when watching movie as PC remote controller.

Supports DualShock1 and compatible controller.

No complicated device driver installation is needed.
PsJoyCon works immediately after plug in USB.
Every setting is saved in on-board memory,
so last setting is restored as they are when USB is plugged in or when PC is turned on.

Power for vibration can be selected between USB and external.
Vibration can work with USB power but if more strong vibration is needed,
you can select external power for vibration(6~12V DC is suitable).

You can configure every function of PsJoyCon USB EX precisely in JoyCon Explorer.

1233590638_2

JoyCon Explorer
https://www.exinterface.com/d/sw/JoyCon_Explorer_Setup_XP(090128).exe
https://www.exinterface.com/d/sw/JoyCon_Explorer_Setup_Vista(090128).exe

1233590397_1 1233590410_44

PsJoyCon Ex is discontinued.

The next version PsJoyCon Ex2 is ready.

 

 

Share with:


Similar Articles

Leave a Reply

Top